Voopoo Argus E40 Pod Cartridge 2pcs Pack

Get VOOPOO Argus E40 Pod Cartridge 2-Pack in UAE

VOOPOO Argus E40 Pod Cartridge is a 2-pack replacement pod for the Argus E40 Kit. Each pod has a built-in PnP X Mesh coil, a side-fill port, and a leak-resistant seal. Three resistance variants are available: 0.3Ω, 0.45Ω, and 0.6Ω. The right one depends on how you vape and what wattage your device runs at.These are not compatible with the full PnP coil range. The built-in coil design is specific to the Argus E40 and the Argus PnP X Empty Pod.

Which Coil Resistance Matches Your Draw Style and Wattage Range

This is the decision that matters before you order. Each resistance variant produces a different draw, a different vapour volume, and requires a different wattage range. Ordering the wrong one means either a restricted draw when you want airflow, or too much vapour if you prefer a tighter hit.

0.3Ω runs at 32 to 40W and produces an open, airy draw. It is built for vapers who want volume and cloud output. High VG e-liquids work best here. Nicotine salts are not recommended at this resistance because the vapour volume makes high-nicotine delivery too harsh.

0.45Ω sits between DTL and MTL at 26 to 32W. It gives a slightly restricted draw without being tight. This is the option for vapers who find 0.3Ω too airy but find 0.6Ω too closed. It handles both freebase and salt nicotine reasonably well depending on concentration.

0.6Ω runs at 18 to 25W and produces a tight, mouth-to-lung draw close to the feel of a cigarette. It is the correct choice if you use nicotine salts, high-strength freebase, or CBD e-liquids. The lower wattage and tighter draw deliver nicotine efficiently without the harshness that comes from high-wattage salt use.

If you are also looking at coils for other devices, check out the pods and coils section for more options.
Available now at VapBuzz with fast delivery across UAE.

How the Side-Fill System Works and Why It Matters

The Argus E40 pod uses a side-fill port rather than a top or bottom fill. The silicone plug sits on the side of the pod and seals tightly after filling. This design keeps the coil away from the filling point, which reduces the chance of flooding the coil when you refill.

Practical steps for refilling:

1. Remove the pod from the device.
2. Locate the silicone plug on the side of the pod.
3. Pull the plug open with your fingernail or a thin tool.
4. Insert your bottle tip and fill slowly. Do not overfill past the maximum line.
5. Replace the plug firmly and let the pod sit for two to three minutes before vaping. This allows the e-liquid to saturate the mesh coil fully and prevents dry hits.

Do not fill past the maximum line marked on the pod. Overfilling compresses the air pocket that keeps the e-liquid from leaking into the airflow channel.

Full Specifications

Frequently Asked Questions

Can I use standard PnP coils in the Argus E40 pod cartridge?

No. The Argus E40 pod has a built-in PnP X Mesh coil that is not removable. It is not designed to accept separate PnP coils from the standard PnP range.

When should I replace the pod rather than refilling it again?

Replace the pod when you notice a burnt or muted flavour that does not improve after a fresh fill, or when the draw becomes inconsistent. Mesh coils in built-in pod designs typically last between one and three weeks depending on how heavily the device is used and the VG content of your e-liquid.

Does the 0.6Ω pod work with CBD e-liquids?

Yes. The 0.6Ω MTL pod running at 18 to 25W is suitable for CBD e-liquids. The low wattage and tight draw are more efficient for CBD delivery than higher-wattage DTL setups.

Are these pods compatible with any other VOOPOO device beyond the Argus E40?

These pods are confirmed compatible with the Argus E40 Kit and the Argus PnP X Empty Pod. Check your device manual before using them in other VOOPOO kits, as PnP X compatibility is not universal across the full VOOPOO range.

Which resistance should I choose if I am switching from cigarettes?

The 0.6Ω pod at 18 to 25W gives the closest draw to a cigarette. Pair it with a nicotine salt e-liquid at 20mg or above for a hit that matches what you are used to from smoking.