Vgod Pod Pro S Pod Cartridge Side Fill

VGOD Pod Pro S Pod Cartridge Side Fill

If you own a Pod Pro S Kit and you’re down to your last working pod, this cartridge is the only replacement that fits it. It holds 2mL of e-liquid, refills from the side instead of the top, and snaps onto the device magnetically, so swapping pods takes a few seconds rather than fiddling with a tight-fitting top fill. You’ll find it filed under pods and coils along with the rest of what’s compatible with VGOD’s pod systems, in case you’re also hunting for other replacement parts.

Why the Side-Fill Port Beats Refilling from the Top

Top-fill pods force you to pull the mouthpiece off or pry open a cap, which usually means at least a few drops end up on your fingers or the counter. This one fixes that with a silicone-sealed port on the side. You pop the plug, tip your e-liquid in, push the plug back, and you’re done. The seal also stops liquid from leaking out on its own when the pod’s sitting in your pocket, so you don’t end up with juice pooling at the bottom of the cartridge or seeping past the mouthpiece.

Choosing Between the 0.6Ω and 0.8Ω Coil

Both resistances come built into the pod, so you’re picking a whole cartridge rather than swapping a coil separately. Go with 0.6Ω if you want bigger clouds, a warmer vapor temperature, and a more intense flavor hit, closer to what a direct-to-lung vaper expects. Go with 0.8Ω if you’d rather have a cooler, smoother pull and squeeze more sessions out of a single charge, which suits a tighter mouth-to-lung draw. Neither option locks you in long term since each pack comes with three pods, so you can try both resistances across different pods in the same pack if you’re not sure yet.

What Happens When the Coil Wears Out

There’s no separate coil to swap here. The coil sits built into the pod itself, so once flavor starts tasting burnt or weak, you throw out that whole cartridge and pop in a fresh one from the pack. That’s slightly less hands-on than rebuildable setups, but it also means you’re not stuck cleaning gunk off old coil heads or struggling to get a stubborn coil unscrewed. You just replace the pod and keep going.

Why the Build Holds Up to Daily Refilling

The pod’s shell is made from PCTG, a plastic that resists cracking better than the basic ABS plastic used in cheaper pods, and it handles repeated refills without warping around the seal. That matters here specifically because you’re popping this plug open and closed regularly, not just once when the pod’s empty. A cheaper shell would wear out around the fill port faster than the coil inside it does.

Full Specifications at a Glance

FAQs

Does this pod work with any other VGOD device?
No. It only fits the VGOD Pod Pro S Kit. Other VGOD pod systems use a different pod shape and won’t accept this cartridge.

Which resistance should I pick, 0.6Ω or 0.8Ω?
Pick 0.6Ω if you want bigger clouds and stronger flavor. Pick 0.8Ω if you’d rather have a cooler, smoother draw and longer battery life between charges.

Do I need to replace the coil separately from the pod?
No. The coil is built into the pod itself, so when performance drops, you replace the whole cartridge rather than swapping a coil inside it.

How many pods come in one pack?
Three. That gives you a few replacements before you need to reorder, especially useful since the coils inside aren’t separately replaceable.

Can spills happen during refilling?
Unlikely if you use the side-fill port correctly. The silicone seal is built specifically to prevent leaks both while filling and during regular use.