OXVA Xlim XL Top Fill Cartridge 3ml In UAE

OXVA Xlim XL Top Fill Cartridge 3ml, Pack of 3

The Xlim XL cartridge is the larger-capacity version of OXVA’s standard Xlim pod. The jump from 2ml to 3ml is a 50% increase in e-liquid capacity per fill, which translates directly into fewer interruptions during the day. If you use your Xlim device heavily and find yourself refilling the 2ml pod twice before lunch, the XL cartridge changes that pattern. You can find these alongside other replacement pods in the pods and coils section on Vapbuzz, where the full range of Xlim accessories is stocked.

The coil is built into the cartridge, so there is no separate coil to seat or replace. When flavour degrades, you swap the whole pod. The top-fill port sits on the top of the cartridge and stays on the device during refilling, which removes the messy step of pulling the pod out every time you need more liquid.

Full Specifications at a Glance

Which Resistance to Pick Based on Your Device Wattage and Draw Style

This is where most buyers get it wrong. Picking a resistance without checking your device’s wattage output or your preferred draw style leads to either a harsh hit or a weak, unsatisfying puff. Here is exactly how each option performs.

0.4 ohm (26 to 30W, RDL)
The most open draw in the XL range. At 26 to 30W it produces the most vapour per puff and the warmest exhale. This coil suits vapers who want a direct lung draw from a pod device and are using freebase nicotine at 3mg to 6mg. It is not suitable for nicotine salts above 10mg as the vapour volume and temperature at this wattage will deliver too much nicotine per inhale.

0.6 ohm (20 to 25W, RDL)
A slightly tighter draw than the 0.4 ohm with less vapour production and a cooler exhale. This sits in the restricted direct lung zone and is the most versatile resistance in the range. Freebase nicotine at 3mg to 12mg works well here, and lower-strength nicotine salts at 10mg to 20mg also perform comfortably at this wattage.

0.8 ohm (12 to 16W, MTL)
The transition point into mouth to lung territory. At 12 to 16W the draw is noticeably tighter and the vapour is cooler and more concentrated. This is the coil that feels closest to a cigarette draw and suits nicotine salts at 20mg to 35mg. If you are switching from disposables or cigarettes and want a familiar feel, this is the resistance to start with.

1.2 ohm (7 to 11W, MTL)
The tightest draw in the range and the lowest wattage requirement. At 7 to 11W battery drain is minimal and each puff delivers a very controlled, restricted hit. This coil is built for high-strength nicotine salts at 35mg to 50mg. The draw is comparable to a cigarette and the low wattage means the device runs cool throughout the session.

You can browse the full pods and coils range on Vapbuzz if you want to compare the Xlim XL against other pod options before deciding on a resistance.

What UniTech 2.0 Changes Compared to Previous Xlim Pods

The original Xlim cartridges and the V2 versions used a single-layer cotton wicking system and a standard sealed coil chamber. UniTech 2.0 makes two specific changes that affect daily performance.

The first is the wicking material. UniTech 2.0 uses multi-layer organic cotton that absorbs e-liquid more evenly across the entire coil surface. Even absorption means more consistent heating across every puff, which is why OXVA claims up to 50% more flavour compared to the 2ml version. In practical terms it means the flavour profile of your liquid stays more accurate for longer before the pod starts to taste flat.

The second is the anti-leak structure. The XL cartridge uses a 5-layer leak protection system that seals the coil chamber at five separate points. Single-layer sealed pods leak when one point fails. The 5-layer design means five independent failures would need to occur simultaneously for liquid to escape the chamber. For vapers who carry their device in a bag or pocket, this is a meaningful difference from earlier Xlim cartridge generations.

Which Xlim Devices Are Compatible with the XL Cartridge

The Xlim XL Top Fill Cartridge is compatible with the entire Xlim series. This includes:

Xlim Pro 3, Xlim Pro 2, Xlim Pro, Xlim Go 2, Xlim Go, Xlim SE 2, Xlim SE, Xlim SE Bonus Pod Kit, Xlim SQ Pro 2, Xlim SQ Pro, Xlim SQ, Xlim Classic Edition, and Xlim Pod Kit.

One important note: the 0.4 ohm variant is not compatible with the Xlim SE, Xlim SQ, or Xlim Pod Kit due to wattage limitations on those devices. If you own one of those three models, start with the 0.6 ohm or above. All other resistances work across the full compatible device list.

How E-Liquid Type Affects Which Resistance You Need

The resistance you choose and the e-liquid you use are connected. Running the wrong liquid in the wrong coil produces either a harsh, unpleasant hit or a weak, flavourless draw.

For the 0.4 and 0.6 ohm coils, use freebase nicotine in a 60/40 or higher VG blend. High-VG liquids produce more vapour at the higher wattage these coils require and the lower nicotine strength prevents the hit from becoming too intense.

For the 0.8 ohm coil, a 50/50 VG/PG blend works well alongside nicotine salts at 20mg to 35mg. The balanced ratio wicks efficiently at the mid-range wattage and the salt nicotine delivers a smooth, satisfying hit without harshness.

For the 1.2 ohm coil, high-PG liquids and nicotine salts at 35mg to 50mg are the right match. Thick high-VG liquids do not wick fast enough at 7 to 11W and can cause dry hits. A thinner 50/50 or high-PG liquid saturates the cotton properly at low wattage.

The Vapbuzz store stocks e-liquids across all VG/PG ratios and nicotine strengths if you need to match a liquid to your chosen coil.

What Is in the Box

1x Pack containing 3 OXVA Xlim XL Top Fill Cartridges 3ml (resistance selected at checkout)

Frequently Asked Questions

Are these pods compatible with all Xlim devices?

Yes, with one exception. The 0.4 ohm variant is not compatible with the Xlim SE, Xlim SQ, or Xlim Pod Kit. All other resistances (0.6, 0.8, and 1.2 ohm) work across the complete Xlim series including the Pro, Go, SE 2, SQ Pro, and Classic Edition.

What is the difference between the 3ml XL cartridge and the standard 2ml Xlim cartridge?

The XL cartridge holds 50% more e-liquid per fill, which means fewer refills during the day. It also uses UniTech 2.0 with a 5-layer anti-leak system and multi-layer cotton wicking, both of which are upgrades over the standard 2ml cartridge design.

Can I use nicotine salts in Xlim XL pods?

Yes. The 0.8 ohm and 1.2 ohm pods are specifically suited to nicotine salts at 20mg to 50mg. The 0.4 and 0.6 ohm pods are better matched to freebase nicotine at lower strengths due to the higher wattage output at those resistances.

Do I need to remove the pod from my device to refill it?

No. The top-fill design allows you to open the fill port and add e-liquid while the cartridge remains in the device. This is one of the main practical differences between the Xlim XL and older bottom-fill or side-fill pod systems.

How long does one Xlim XL pod last?

With regular daily use and a non-sweetened e-liquid, most vapers get one to two weeks from a single cartridge. Sweetened liquids with high sugar content reduce that lifespan because caramelised residue builds up on the coil faster than with unflavoured or lightly flavoured liquids.

How many cartridges come in a pack?

Each pack contains 3 cartridges of the same resistance. You select the ohm option at checkout.