UWELL Caliburn G3/G3 pro/G3 eco/G3 lite/GK3 Pods 2.5ml Replacement Pod Cartridge in Dubai, UAE

Uwell Caliburn G3 Replacement Pod Cartridge 2.5ml

These are the official replacement pods for the Uwell Caliburn G3. Each cartridge has the coil built in, so there is no separate coil to install, no dry hit from a bad seat, and no guessing about compatibility. You fill it from the side, snap it in, and vape. When the flavour starts to fade, you swap the whole pod.

Each pack contains 4 cartridges, which gives you enough to rotate without running out mid-week.

Which Resistance Should You Pick

The G3 pod comes in two options. The difference is not just a number on a spec sheet. It changes the actual feel of every puff.

The 0.6 ohm pod runs up to 25W and produces a warmer, denser draw. The throat hit is noticeable, and the vapour volume is higher. This option pairs best with freebase nicotine at 3mg to 6mg. If you prefer a looser, more open draw closer to restricted direct lung, the 0.6 ohm is the one to go with.

The 0.9 ohm pod runs at a lower wattage and delivers a cooler, tighter draw. It is built for mouth-to-lung vaping and works well with nicotine salts at 20mg to 50mg. If you are coming from a cigarette or switching from a disposable, the 0.9 ohm will feel the most familiar.

One thing worth knowing before you order: G3 pods are not compatible with the Caliburn A2S, A3, G2, or the original G series. These pods are made specifically for the G3 platform, which includes the G3, G3 Pro, G3 ECO, G3 Lite, GK3, and GK3 Tenet.

UWELL Caliburn G3 Replacement Pod Specifications

Why Uwell Built the Coil Into the Pod

On most pod systems, the coil sits separately inside the cartridge. You replace one without touching the other. Uwell took a different approach with the G3. The coil and the cartridge are a single sealed unit.

The reason this works in your favour is twofold. First, the sealed construction creates an air-tight chamber around the coil, which is why G3 pods have a reputation for not leaking even when left in a pocket or bag. Second, because the coil never carries over from one pod to the next, you always start fresh. No residual burnt taste from a coil that was already half-dead.

The Pro-FOCS system Uwell uses inside these pods is designed to keep the flavour profile of your liquid accurate at temperature. It does not necessarily make cheap liquid taste better, but it does stop a good liquid from tasting flat or muted, which is a common complaint with generic coil designs.

The PCTG material used for the cartridge body is resistant to most e-liquid compositions including high-VG blends and liquids with a strong citrus or menthol base. It will not crack or discolour the way cheaper plastics do.

How Long Do G3 Pods Last

Pod life varies by how often you vape and what liquid you use. Under normal daily use, most vapers get between one and two weeks from a single G3 pod before the flavour starts to degrade. Sweetened liquids and dessert flavours shorten that window because the sugar content caramelises on the coil faster. Unflavoured or lightly flavoured liquids will extend pod life noticeably.

A few habits that help: prime the pod properly before the first use by filling it and waiting five minutes before firing. Keep the liquid level above the intake ports. And avoid chain vaping, which heats the coil faster than it can cool down between puffs.

Where to Find More Uwell and Pod Accessories

If you need to stock up on hardware for other devices at the same time, the full range of pods and coils is available in one place on Vapbuzz. For everything Uwell makes, from devices to accessories, the Uwell collection has the complete lineup.

What Is in the Box ?

1 pack containing 4 Uwell Caliburn G3 Integrated Coil Cartridges

Frequently Asked Questions

Are these pods compatible with the Caliburn G2 or A3S?

No. G3 pods are only compatible with the Caliburn G3, G3 Pro, G3 ECO, G3 Lite, GK3, and GK3 Tenet. They will not fit any other Caliburn model.

What is the difference between the 0.6 ohm and 0.9 ohm pods?

The 0.6 ohm gives a warmer, airier draw suited to freebase nicotine. The 0.9 ohm gives a tighter, cooler draw suited to nicotine salts and mouth-to-lung vaping. Both deliver the same flavour quality, the draw style is what changes.

Can I refill these pods more than once?

Yes. These are refillable cartridges. You can refill them multiple times through the side-fill port until the coil degrades and the flavour drops off, at which point you replace the whole pod.

How do I know when it is time to replace the pod?

The clearest sign is a burnt or muted flavour that does not go away after refilling. Some vapers also notice reduced vapour production. At that point the coil inside the pod has reached the end of its life and the pod needs replacing.

Do these pods leak?

The integrated sealed coil design and silicone-stoppered side fill make leaking uncommon with G3 pods. The most frequent cause of leaking is overfilling past the max line or drawing too hard before the pod is properly primed.

What nicotine strength works best with G3 pods?

For the 0.6 ohm pod, 3mg to 6mg freebase nicotine works well. For the 0.9 ohm pod, 20mg to 50mg nicotine salt gives the best experience. Higher freebase strengths in the 0.6 ohm can deliver a harsh throat hit.